Please read and follow all directions carefully.
Make sure your clip is adjusted properly. Never let your clip slide on the line, this will damage the clip.  
Never drop your TX-12 Mini , this can damage the clip or the rear pin.

 

In time the rear pin will need to be replaced, again check for signs of wear. We highly recommend 14# or larger diameter super braids; 8# or larger diameter monofilament lines.

Line from lure runs under clip, not between pinch. The line from planer board to rod will be pulling from back side of clip. This will give you the angle needed to release clip with a quick jerk. Always adjust clip so it won’t slip, or damage will occur, but light enough to pull free by hand with a quick jerk. Attach a #7 swivel or split-shot about 18” in front of your lure. Your board will slide down to swivel or split-shot, this will prevent board from making contact with fish.